Rail

How to Measure Train Speed With an iPhone

Find out how fast your train is going with an iPhone: why a window seat helps GPS, why tunnels interrupt the reading, and how to record the journey.

The GPS Speedometer team · Apprexy StudioPublished 6 min read

As a passenger, you can measure your train's speed with an iPhone and a GPS speedometer app: the phone follows its own position by satellite and works out how fast that position is changing. Sitting by a window makes the biggest difference, because a metal carriage blocks much of the signal. Set everything up before the train leaves, record the journey, and look at the figures when the train has stopped or you have arrived.

Why a train carriage is a hard place for GPS

Satellite signals are weak by the time they reach the ground, and they travel best in a straight line through open air. A railway carriage puts a lot in the way: a metal body and roof, and on many trains windows with metallic coatings that keep heat out but also dampen radio signals. This doesn't stop GPS from working, but it changes how it behaves. The phone may take longer to find enough satellites at the start, and it is more likely to lose some of them when the line bends or passes through a cutting.

Choosing a seat that helps the train's GPS reading

Where you sit matters more than any setting in the app.

  • Take a window seat. The glass is the phone's view of the sky. A phone near the window sees far more satellites than one in an aisle seat or in a bag on the floor.
  • Keep the phone near the glass. A secure spot on the window ledge or the fold-down table, where it can't slide off, works better than a pocket. If there is nowhere it will stay put, keep it in a jacket pocket on the window side rather than in a bag.
  • Avoid seats under solid panels. Seats by a door, a luggage rack across the window or a partition between carriages can all block part of the view.
  • Either side can work. Which side faces more open sky depends on the route and the direction of travel, so if the reading is poor, moving across the aisle on your next trip is worth a try.

Whatever spot you choose, the phone should be stable and out of the way of other passengers. A phone that falls into the gap between seat and wall is far more trouble than a missing reading.

Tunnels, stations and cuttings: when the speed drops out

GPS needs a view of the sky, so some parts of a rail journey will always interrupt it.

Where What usually happens What to expect after
Tunnels The signal disappears and the reading stops updating or falls away It recovers a short while after the train comes back out
Covered stations The roof blocks the sky, often just as the train slows Readings return once the train leaves the station
Deep cuttings and tall buildings Some satellites are hidden, so the reading becomes less steady It settles as the view opens up
Underground sections No usable signal at all Nothing until the train reaches the surface

These gaps are normal and not a fault in the phone or the app. GPS Speedometer reads speed directly from GPS, and accuracy depends on signal quality: in a tunnel there is simply nothing to read until the signal comes back. When it does, the first few readings may jump before settling, so a spike straight after a tunnel is usually the phone catching up rather than the train speeding up.

Setting up GPS Speedometer before the train departs

Do this on the platform or in your seat before the doors close, so you won't need to handle the phone once the train is moving.

  1. Allow location. When iOS asks, let GPS Speedometer use your location. If you declined earlier, go to Settings › Privacy & Security › Location Services (older iOS versions place it under Privacy), pick the app, allow access while using it, and leave Precise Location on.
  2. Pick the train profile. GPS Speedometer has seven vehicle profiles, and the train is one of them.
  3. Choose your unit. Set km/h or mph, whichever you are used to. Knots are also available but rarely used on land.
  4. Check the gauge. The live readout with the Digital Clean gauge is free. The other gauge themes need Premium.
  5. Start recording. Trip recording is a Premium feature. Start it before departure so the whole journey is captured, including the start.
  6. Put the phone in its place. Set it down where it is secure and near the window, or stow it. Recording continues in the background, so you can switch to music or a book, but fully closing the app ends the recording.

You don't need mobile data or the train's Wi-Fi for any of this. GPS works without a connection, so the speedometer and trip recording carry on through areas with no coverage. The speed-limit alerts come from road data and have nothing to tell you on a railway, so leave them off.

Keeping the battery healthy on a long train journey

GPS running for hours, with the screen on, uses a noticeable amount of battery. A few habits help:

  • Charge before you travel. Start the journey with a full battery, especially if you will need the phone for tickets or directions at the other end.
  • Let the screen sleep. The recording doesn't need the screen on. Locking the phone saves more power than anything else.
  • Use the seat socket or a power bank. Many trains have power outlets, though not all, and not every one works. A small power bank is a reliable backup.
  • Watch the heat. A phone lying in direct sun against the window can get warm, and an iPhone that is too hot may dim its screen or pause charging. Shade it if the sun is on your side.

Reading your train journey once you've arrived

When the train has stopped and you are ready to look, open the recorded trip. With Premium, GPS Speedometer saves each one to your history with the distance covered, the drive time, average and max speed, a speed chart and the route on a map.

On a train, each of these tells its own story:

  • The route traces the line you travelled. Gaps or straight jumps on the map usually mark tunnels, where no positions were recorded.
  • The speed chart shows the rhythm of the journey: acceleration out of each station, steady running between them, and slowing for curves or junctions.
  • Max speed is the figure most people want, but check it against the chart. A single sharp peak right after a gap in the signal is more likely a GPS jump than real speed.
  • Average speed includes the time spent slowing and stopping at stations, so it will be well below the speed the train reaches on open stretches.

FAQ

How fast is my train going right now?

A GPS speedometer app can tell you, as long as the phone can see the sky, which is easiest from a window seat. In tunnels and covered stations the reading pauses until the signal returns. Recording the trip lets you see the full picture afterwards without watching the screen.

Why does the speed freeze or drop to zero in a tunnel?

GPS needs a direct view of satellites, and a tunnel blocks it completely. The app has nothing to measure until the train comes out, and then it recovers on its own.

Can I use GPS Speedometer on a train for free?

Yes, the live speed readout with the Digital Clean gauge is free. Premium unlocks the other gauge themes, HUD mode, trip recording and history, the speed-limit alerts, the drag timer and the Picture-in-Picture widget.

Do I need the train's Wi-Fi or mobile data?

No. GPS doesn't use a data connection, so the speedometer and trip recording work offline. Only the automatic speed-limit lookup needs internet, and it isn't useful on a railway.

Written by the GPS Speedometer team with the help of AI. What the article says about GPS Speedometer comes from the app itself; menu names in other apps can change between versions.